The SIRION™ Mini, SIRION™ Midi, SIRION™ Mega and SIRION™ Mega (HF) models are specifically designed to produce pure water from 10 L/h to 139 m³/h with low footprint and reduced operation requirement.
- Fully automatic
- High salt rejection
- Low energy membranes
- Reduced footprint
- Timed recirculation rinse
- Flexible controller *
- Programmable user interface
- 1 or 5μm prefiltration included
- Low maintenance
- Options available: pH control, concentrate rinse valve and anti-scalant/sodium bisulfate dosing equipment, VFD, etc
SIRION™ Mini
From 10 to 90 L/h
- 3 models: 10 / 40 / 80 L/h
- 2.5" low energy membranes
- Rotary vane pump
- Wall mounted
- Ideal for process water and air conditioning
SIRION™ Midi
From 90 to 800 L/h
- 5 models: 100 / 200 / 300/ 500 / 750 L/h
- 4" low energy membranes
- Rotary vane pump
- Ideal for industrial process water and central pure water for hospitals and lab
SIRION™ Mega
Flow rates from 5 to 30 m3/h
- 7 models
- 8" low energy membranes
- Vertical multi-stage centrifugal pump
- Frequency controlled variable speed pump can save up to 50% of the electrical power required by conventional systems lower operating pressures; cost savings
- Modem & RS232 connections
SIRION Mega (HF)
Flow rates from 32 to 139 m³/h
- 6 models
- Low energy membranes
- Frequency controlled variable speed pump (VFD)
- Concentrate throttling valve for flow adjustment
- Skid-mounted, standardized systems, short lead times, quick installation and start-up
Our new and more competitive CIP RO - Clean In Place Reverse Osmosis - Station which is now compatible with more RO products, offering smaller units, adjusted flows and a real plug & play design in order to fulfill all of your needs.
Veolia Control Units
- RO6 is a simple programmable electronic controller with alphanumeric digital display for conductivity in μS/cm, temperature, display of the current state of operation, clear text display in the case of a fault. It is very simple to use.
- RO30 is a flexible controller which provides the control and switching on and off of the pump, valves etc. It continuously monitors the input limit values, giving a fault signal in the case of an out of specification value, stopping the plant with a time delay if appropriate.
Applications
- Boiler feed
- Biotechnologies
- Electronics
- Process water
- Cooling water
- Reuse / recycling
- Chemical industry
- Healthcare
- Central pure water for hospitals/lab
- Primary metals
- Air conditioning
- Heating systems
- Wastewater
- Washing station