Technologies

14 Products
D

Duo Eclipse™

In many industrial processes, any dissolved salts in water can cause problems. Removing all the dissolved salts from water is called deionisation or demineralisation. Duo Eclipse™ two-stage deionisers remove up to 98% of total dissolved solids and will typically produce water with a conductivity of less than 20 μS/cm. Flow rates from 0.25 to 4 m3/hr.
Ion exchange & Deionisation
E

Escalator™

Perforated stainless steel screen panels are carried on heavy-duty chains and incorporate holes of 6 mm (1/4'') or 3 mm (1/8'') diameter giving fine screening in any direction.
I

IDRASCREEN®

To separate solids from process and drainage water has always been a serious problem often difficult to solve in many industrial sectors and wastewater treatment plants.

Ionpro™ LX

Ionpro™ LX systems produce high purity water with low bacteria levels.
Ion exchange & Deionisation
M

Mectan™

The Mectan™ vortex grit system is a circular chamber that takes full advantage of the tangential inflow velocity along the peripheral wall of the chamber to assist in the grit removal process.
O

OPADEN™

The Opaden compact unit removes nitrates to produce potable water for small size cities
Ion exchange & Deionisation
R

RO + CEDI SYSTEMS

RO + CEDI Systems combines reverse osmosis (RO) and continuous electrodeionization (CEDI) to produce high purity water suitable for high pressure boilers and other industrial applications. Flow rates for standard systems range from 2.5 to 25 m3/hr.
Ion exchange & Deionisation

ROTOPAC™

The Rotopac™ is a simple device for dewatering and compacting the screenings collected on bar screens and fine screens.
S

SAM™ Type GDS

The SAM™ grit dewatering screw is designed to provide easy and efficient separation of the grit from the liquid matrix, using an air or cyclone separator.
T

TiPSS

Veolia Water Technologies offers a range of equipment especially designed for (pre-) treatment of Oily Waste Waters either for Upstream or Downstream Oil & Gas applications.
Screening and Separation

TIPSS ALKYLATION UNITS

In alkylation processes, the hydrofluoric or sulfuric acid catalyst is removed from the alkylate stream in an acid settler where it is collected in the acid boot
Screening and Separation

TIPSS Solutions

The CPI basin can be executed in steel or concrete. The concrete units are specifically suited to integrate with sewer systems below ground level so that a gravity flow can be used.
Screening and Separation

TIPSS TPI47 PLATE PACKS

Spare plate pack for oil water separators
Screening and Separation
W

WAPOL

Wapol polish reverse osmosis permeate to produce high purity water of up to 18 MΩ.cm.
Ion exchange & Deionisation